Bronce Estañado con Plomo C92200 Navy G (CDA 922)

C92200 (CDA 922) is an excellent bronze casting alloy de India, recognized for its maquinabilidad and resistencia in a variety of engineering applications.

Conex Metals is your trusted source for C92200 Leaded Tin Bronze, Navy G, offering solid bar stock (ASTM B505) and made-to-order castings in both centrifugal (ASTM B271) and sand (ASTM B584) casting methods. Proporcionamos both off-the-shelf and special casting options to meet your specific needs. Our expert team will determine the optimal casting method based on your size, specification, and desired quantity.

C92200 Leaded Tin Bronze is a versatile alloy utilizado en various demanding applications, including:

Valves
Fittings
Pressure-containing parts
Pump components
Marine Hardware

This alloy is adecuado para applications up to 550°F (288°C)

C92200 Composición Química:
(%Max., Unless Shown as Range or Min.)

Editar
C92200 Composición Química
	Cu (1)	Al	Sb	Fe	Pb	Ni (2)	P (3)	Si	S	Sn	Zn
Min./Max.	86.0-90.0	0.005	0.25	0.25	1.0-2.0	1	0.05	0.005	0.05	5.5-6.5	3.0-5.0
Nominal	88	–	–	–	1.5	–	–	–	–	6	4.5

(1) In determining Cu min., Cu may be calculated as Cu + Ni.
(2) Ni value includes Co.
(3) For continuous castings, P shall be 1.5%, max.
Note: Cu + Sum of Named Elements, 99.3% min.

C92200 Propiedades Mecánicas:
measured at room temperature, 68 F (20 C)

Editar
C92200 Propiedades Mecánicas
Temper	Section Size	Rockwell Dureza				Vickens Hard.	Brinell Hard.		Shear Resistencia	Fatigue Resistencia*	Izod Impact Resistencia	Yield Resistencia (0.5% ext. under load)	Yield Resistencia (0.2% offset)	Yield Resistencia(0.05% offset)	Temp	Tensile Resistencia	Cold Work	Typ/ Min	El
	in.	B	C	F	30T	500	500	3000	ksi	ksi	ft-lb	ksi	ksi	ksi	F	ksi	%		%
	mm.								MPa	MPa	J	MPa	MPa	MPa	C	MPa
As Sand Cast
M01	0	–	–	–	–	–	65	–	–	11	0	20	–	–	68	40	0	TYP	30
	0	–	–	–	–	–	65	–	–	76	0	138	–	–	20	276			30
As Centrifugal Cast
M02	0	–	–	–	–	–	–	–	–	–	0	16	–	–	68	34	0	SMIN	22
	0	–	–	–	–	–	–	–	–	–	0	110	–	–	20	234			22
As Continuous Cast
M07	0	–	–	–	–	–	–	–	–	–	0	19	–	–	68	38	0	SMIN	18
	0	–	–	–	–	–	–	–	–	–	0	131	–	–	20	262			18
As Permanent Mold Cast
M05	0	–	–	–	–	–	–	–	–	–	0	16	–	–	68	34	0	SMIN	24
	0	–	–	–	–	–	–	–	–	–	0	110	–	–	20	234			24
As Sand Cast
M01	0	–	–	–	–	–	–	–	–	–	0	16	–	–	68	34	0	SMIN	22
	0	–	–	–	–	–	–	–	–	–	0	110	–	–	20	234			22

*Fatigue Resistencia: 100 x 10 ⁶cycles,
unless indicated as [N]X 10⁶.

C92200 Applicable Especificaciones:

Editar
C92200 Applicable Especificaciones
Product	Specification
Ingot	ASTM B30
Sand	ASME SB61, SB584
	ASTM B61, B584
	SAE J461, J462
Valves	MILITARY MIL-V-17547
Fittings	ASME B16.24, SB61
	ASTM B61
	FEDERAL WW-P-460
Flanges	ASME SB61
	ASTM B61
	FEDERAL WW-P-460
Centrifugal	ASTM B271
	SAE J462, J461
Continuous	ASTM B505
	SAE J462, J461