Placa para Puente de Bronce Estañado C91100

Conex Metals is your trusted source for C91100 Tin Bronze Plate, also known as Bridge Plate. We stock large blocks of CDA 911, which can be custom cut to your specific dimensiones. Our plate is dual certified to meet both ASTM B505 and ASTM B22 norma/estándars, ensuring exceptional quality and fiabilidad. While this alloy is typically cast on a made-to-order basis, our expert team will work with you to determine the optimal casting method based on your size, specification, and quantity needs. Trust Conex Metals to deliver alta calidad C91100 Tin Bronze Plate products that meet your exact specifications, backed by our commitment to exceptional customer service and support.

C91100 Tin Bronze Plate, also known as Bridge Plate, is a versatile alloy that excels in various demanding applications, leveraging its exceptional resistencia, resistencia a la corrosión, and durabilidad. Typical applications for this alloy include:

– Piston rings
– Bearings
– Bushings
– Bridge plates

C91100 Bridge Plate Typically Used For
This material is utilizado en a variety of applications. Typical uses for this alloy are: Piston rings, bearings, bushings, bridge plates.

C91100 Bridge Plate Composición Química
(%max., unless shown as range or min.)

Editar
C91100 Bridge Plate Composición Química
	Cu (1)	Al	Si	S	Sn	Zn	Sb	Fe	Pb	Ni (2)	P (3)
Min./Max.	82.0-85.0	0.005	0.005	0.05	15.0-17.0	0.25	0.2	0.25	0.25	0.5	1
Nominal	83.5	–	–	–	16	–	–	–	–	–	–

(1) In determining Cu min., Cu may be calculated as Cu + Ni.
(2) Ni value includes Co.
(3) For continuous castings, P shall be 1.5%, max.
Note: Cu + Sum of Named Elements, 99.4% min.

C91100 Bridge Plate Propiedades Mecánicas
(measured at room temperature, 68 F (20 C)

Editar
C91100 Bridge Plate Propiedades Mecánicas
Temper	Section Size	Cold Work	Typ/Min	Temp	Tensile Resistencia	El	Rockwell Dureza				Vickens Hard.	Brinell Hard.		Shear Resistencia	Fatigue Resistencia*	Izod Impact Resistencia	Yield Resistencia (0.5% ext. under load)	Yield Resistencia (0.2% offset)	Yield Resistencia (0.05% offset)
	in.	%		F	ksi	%	B	C	F	30T	500	500	3000	ksi	ksi	ft-lb	ksi	ksi	ksi
	mm.			C	MPa									MPa	MPa	J	MPa	MPa	MPa
As Sand Cast
M01	0	0	TYP	68	35	2	–	–	–	–	–	–	135	–	–	0	25	–	–
	0			20	241	2	–	–	–	–	–	–	135	–	–	0	172	–	–
M01	0	0	SMIN	68	–	–	–	–	–	–	–	–	–	–	–	0	–	–	–
	0			20	–	–	–	–	–	–	–	–	–	–	–	0	–	–	–