C93600 High Leaded Tin Bronze, MOD SAE 64 Solid Bar
C93600 High Leaded Tin Bronze, MOD SAE 64 Solid Bar
Conex Metals is your trusted source for C93600 High Leaded Tin Bronze, offering MOD SAE 64 solid bar stock in various sizes to meet your specific needs. We maintain a comprehensive inventory of CDA 936 solid bar in full bar lengths, and our expert team will precision-cut the material to your exact requirements.
While we stock a range of sizes in rounds and other sizes on a made-to-order basis, please note that the casting method will depend on your specific size, specification, and quantity needs.
C93600 High Leaded Tin Bronze is a versatile alloy used in various demanding applications, including:
– Bushings for corrosion, lubrication, or pressure
– Cam bushings for diesel engines
– Crankshaft main bearings
– Guide bushings for piston rods and valves
– Hydraulic gland seals
– Locomotive bearing parts
– Main bearings for presses
– Piston pin bearings
– Pump sleeves
– Rod bushings
– Rolling mill bearings
– Sleeve bushings (for cranes, etc.)
– Bearings for corrosion, lubrication, or pressure
By choosing Conex Metals as your partner, you can trust that you’ll receive high-quality C93600 High Leaded Tin Bronze products that meet your exact specifications, backed by our commitment to exceptional customer service and support.
Chemical Composition
(%max., unless shown as range or min.)
| Mechanical Properties | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Temper | Section Size | Cold Work | Typ/Min | Temp | Tensile Strength | El | Rockwell Hardness | Vickens Hard. | Brinell Hard. | Shear Strength | Fatigue Strength* | Izod Impact Strength | Yield Strength (0.5% ext. under load) | Yield Strength (0.2% offset) | Yield Strength (0.05% offset) | ||||
| in. | % | F | ksi | % | B | C | F | 30T | 500 | 500 | 3000 | ksi | ksi | ft-lb | ksi | ksi | ksi | ||
| mm. | C | MPa | MPa | MPa | J | MPa | MPa | MPa | |||||||||||
| As Centrifugal Cast | |||||||||||||||||||
| M02 | 0 | 0 | TYP | 68 | 35 | 15 | - | - | - | - | - | 65 | - | - | - | 0 | 21 | - | - |
| 0 | 20 | 241 | 15 | - | - | - | - | - | 65 | - | - | - | 0 | 145 | - | - | |||
| M02 | 0 | 0 | SMIN | 68 | 32 | 10 | - | - | - | - | - | - | - | - | - | 0 | 16 | - | - |
| 0 | 20 | 221 | 10 | - | - | - | - | - | - | - | - | - | 0 | 110 | - | - | |||
| As Continuous Cast | |||||||||||||||||||
| M07 | 0 | 0 | SMIN | 68 | 33 | 10 | - | - | - | - | - | - | - | - | - | 0 | 20 | - | - |
| 0 | 20 | 227 | 10 | - | - | - | - | - | - | - | - | - | 0 | 138 | - | - | |||
| M07 | 0 | 0 | TYP | 68 | 35 | 15 | - | - | - | - | - | 65 | - | - | - | 0 | 21 | - | - |
| 0 | 20 | 241 | 15 | - | - | - | - | - | 65 | - | - | - | 0 | 145 | - | - | |||
| As Permanent Mold Cast | |||||||||||||||||||
| M05 | 0 | 0 | TYP | 68 | 35 | 21 | - | ||||||||||||
(1) Ni value includes Co.
(2) For continuous castings, P shall be 1.5%, max.
Note: Cu + Sum of Named Elements, 99.3% min.
Mechanical Properties
(measured at room temperature, 68 F (20 C)
| Chemical Composition | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Cu | Al | Si | S | Sn | Zn | Sb | Fe | Pb | Ni(1) | P(2) | |
| Min./Max. | 79.0-83.0 | 0.005 | 0.005 | 0.08 | 6.0-8.0 | 1 | 0.55 | 0.2 | 11.0-13.0 | 1 | 0.15 |
| Nominal | 81 | - | - | - | 7 | - | - | - | 12 | - | - |
